COVERT CAMERAS

Download the firmware update. Save the .bin file to an unlocked SD card.

Take the SD card out of the computer.

LOCK the SD card and insert it into the camera. To lock your SD card, use the small switch on the upper left side — press the switch down and it will be locked.

Switch the camera to the SETUP position and wait until the COVERT logo appears on the display screen — this completes the firmware update. Do not turn the camera's power off while the upgrade is in process.

While the camera is still in setup mode, press the menu button. Scroll over to the SYS tab, scroll down to Default and press OK. You may then remove the SD card and UNLOCK it by pressing the small switch back up.