IQ Bowsights FAQ

When adjusting the Retina Lock, you’ll need a 1/16 Allen wrench. Refer to the photos below to find the adjustment points for moving the Retina up or down, left or right.

Using the 3/32 Allen wrench, loosen the set screw and keep the wrench in the screw head. Grasp the Allen wrench with one hand and the pin with the other, and slide both hands up or down.

IQ sights come with 1/16, 3/32, 1/8, and 9/64 Allen wrenches.

We would recommend using the mounting holes that allow the sight housing to line up properly with your peep.

No, replacement pins are not available.

Yes, removing a pin would void the manufacturer’s warranty on all but the IQ Define Pro sights. It would be considered an alteration or modification to the original manufacturer specs of the sight.

• Define: 2”
• Define Pro: 2-1/2”
• Micro: 2-1/4”
• Pro Hunter: 2-1/4”
• Pro One: 2-1/4”
• Pro XT: 2-1/4”
• Ultra -Lite: 2-1/4”

No, the sights are not designed to have pins added or removed.

Yes, IQ sights accept a sight light with a thread of ¼-28.

The pins in our newer sights are all .019″.

Only the Define Range Finding sights have replaceable bubble levels.

No, you cannot change the fiber optic colors. We do not offer customized order options.

Yes, they both come with a blank sight tape.

The Pro One Lens Kit was discontinued in 2017 and is no longer available for purchase through FeraDyne Outdoors.

Please contact FeraDyne Outdoors.

Please contact FeraDyne Outdoors.

Please sign up to become a dealer here.

Please call 1-800-282-4868 or fill out the contact form to request an international shipping quote.

No, we require a physical mailing address for shipping.

Please view more info about the FeraDyne Outdoors Pro Staff.