Dome for CAP-200/250

Rotomolded plastic dome for 200lb and 250lb Capsule Feeder. Replacement dome only.

Auger - For 1,000lb Feeder / Badass Auger (48")

High density polyethylene constructed auger. This auger is for the 1,000 LB feeder.

Auger - Two Piece Barrel Feeder (42")

**INCLUDES BOTH TOP AND BOTTOM PIECES OF AUGER** - High density polyethylene constructed auger. This auger is for the 55 Gallon Barrel Feeder.

Base for CAP-200

Rotomolded plastic base for Capsule 200lb Feeder. Replacement base only.

Base for CAP-250

Rotomolded plastic base for Capsule 250lb Tire Feeder. Replacement base only.

Hog Ring 800lb

Heavy duty metal goes around the bottom of your feeder where hogs can grind their tusks and tear up the plastic on your feeder. This specific ring will fit a 800lb feeder.  

Metal Replacement Fill Cap for 100lb / 200lb / 250lb Feeders

This is a metal fill cap to replace plastic fill cap. The metal replacement fill cap is made for the 100 lb / 200 lb / 250 lb Feeders. Goes over the fill hole in order to keep varmints out. Made of metal, there is no way anything will chew through this.

Varmint Cage

Heavy duty galvanized steel varmint cage. Mounts using six bolts and washers (not included).

Auger - For 500lb / 800lb Feeders (36")

High density polyethylene constructed auger. This auger is for the 500 LB and 800 LB feeder.

Auger - For 100lb / 200lb Feeders (19")

High density polyethylene constructed auger. This auger is for the 100 LB and 200 LB feeders.

Auger - For 250lb Feeder (24")

High density polyethylene constructed auger. This auger is for the 250Lb feeder.  

Hog Ring 250lb/450lb

Heavy duty metal goes around the bottom of your feeder where hogs can grind their tusks and tear up the plastic on your feeder. This specific ring will fit a 250# or 450# feeder.

Base for CAP-100

Rotomolded plastic base for Capsule 100lb Feeder. Replacement base only.

Dome for CAP-100

Rotomolded plastic dome for 100lb Capsule Feeder. Replacement dome only.

Powerhead Cap

Plastic cap for power head. Constructed of UV protected high-density polyethylene, the powerhead cap mounts with two large, easy-to-use wing bolts.

Capsule Block Holder

The Capsule Block Holder will hold and protect one, 25lb mineral or attractant block used in the supplemental feeding of whitetail deer, cattle and other livestock. It is designed to strap onto any stationary object (ie. Tree, Fencepost) and includes two...

Outpost Feeder Powerhead

Replaces the component that includes the timer, delay, spinner and battery compartment. Simple installation breathes new life into your damaged Outpost Feeder. The motor runs off of 4 AA batteries (not included). They typically last 4-6 months...

Capsule Brick Holder

The Capsule Brick Holder will hold and protect up to four, 4 lb mineral or attractant bricks used in the supplemental feeding of whitetail deer, cattle and other livestock. It is designed to strap onto any stationary object (ie. Tree, Fencepost) and...

Solar Panel for Capsule Feeders

12v, 60mA solar panel comes with "piggy-back" leads for easy use with any 12v rechargeable battery and 12v timer. Mounts flat to powerhead cap with four screws (included). If you have an older feeder that has a solar panel mounted at an angle, be sure to...

Cleanout Plug (For 800lb Feeder)

Replacement Cleanout Plug for the 800# feeder.